Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 27، شماره: 2
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 647
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-27-2_018
تاریخ نمایه سازی: 17 خرداد 1393
چکیده مقاله:
Building waste is a critical issue in current construction. Innovative design strategies are required to reduce the depletion of valuable materials and resources through providing flexible and versatilestructures. This study focuses on the development of an industrial, flexible, and demountable wallpanel construction system. The panel system consists of concrete blocks with steel connectors that canbe simply assembled and disassembled onsite. This work experimentally investigates the structuralresponse of panels under compressive load. After testing the stability and load-bearing capacity of thedesigned panels, the construction stage of the walls indicated satisfactory performance with predictable behavior within the installation process. During the experiment, displacement and strain were determined using linear variable differential transducers and strain gauges. Careful visual examinationwas also performed to observe the formation of cracks in panels. Although the architectural panels were not designed to resist the structural load, results in terms of load-deflection, strain distribution, and crack patterns signify that the panels’ response to the compressive load is satisfactory
کلیدواژه ها:
Precast Concrete Wall Panel ، Industrial Flexible & Demountable (IFD) ، Building System ، Functional Requirements ، Structural Behaviour
نویسندگان
n Sadafi
Department Architecture, Faculty of Engineering, University Kebangsaan Malaysia (UKM), Bangi Malaysia
m.f.m zain
Department Architecture, Faculty of Engineering, University Kebangsaan Malaysia (UKM), Bangi Malaysia
m jamil
Department Architecture, Faculty of Engineering, University Kebangsaan Malaysia (UKM), Bangi Malaysia