Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 30، شماره: 1
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 289
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-30-1_008
تاریخ نمایه سازی: 9 خرداد 1396
چکیده مقاله:
In this paper, an Ultra High Frequency (UHF) base band processor for a passive Tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock anagement are used. In oder to reduce the area Decimal Matrix Code (DMC) Technique is used.The digital base band processor has been simulated and implemented using Xilinx latform. The complete design is verified and tested on Spartan-6 Field Programmable Gate Array (FPGA) board. The performance of system is measured in terms of power. The Synthesis result shows that, the power required for complete design of digital baseband processor is 5mW on a supply voltage of 1.2V
کلیدواژه ها:
Radio Frequency Identification ، base band Processor ، Hardware Descriptive Language ، Field Programmable Gate Array
نویسندگان
N.M Dyamannavr
Govt. Engineering College Engineering Kushalnagar, Karnataka, India
N.G kurahatti
East point College of Engineering and Technology ,Bangalore Karnataka, India
A Christina
Govt. Engineering College Engineering Kushalnagar, Karnataka, India