Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 30، شماره: 7
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 280
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-30-7_019
تاریخ نمایه سازی: 23 دی 1396
چکیده مقاله:
A shower cooling tower (SCT) operates without fill because of salt decomposition on the fill that leads to deterioration of conventional cooling tower performance. This study presents a two-dimensionalmathematical model for energy and exergy analysis of multi-diameter droplets and air interaction along with the height of the forced draft SCT, to predict the exit condition of water droplet for industrial application. Different inlet air dry bulb temperatures (DBT) were used for the study and the model was validated with experimental results. At the inlet of the tower, ten different diameters of water dropletssimultaneously were used at a given time for analysis and the droplet diameter model based on Rosin Rammler distribution. The result showed that thermal efficiency and second law efficiency relativelyincreased along the height of SCT with increase of the inlet air temperature. It was confirmed that maximum reduction in water droplet temperature along the height of SCT was achieved by minimum inlet air DBT. It was also noticed that exergy supplied by water was more than exergy absorbed by air and maximum destruction of total exergy took place at the beginning of air-water interaction
کلیدواژه ها:
نویسندگان