Buckling Behavior of Semi-scale Steel Tank with Carbon Fiber Reinforced Polymer Ring Subjected to Lateral Uniform Pressure Loading

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 329

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJE-32-10_010

تاریخ نمایه سازی: 10 آذر 1398

چکیده مقاله:

Research on increasing the buckling strength of tanks carrying fluid and also cylindrical shells of thin-walled steel in civil engineering and mechanics is important. This is due to the widespread use of these structures in the industry. Due to the low thickness of the body and also due to the pressure forces entering these tanks, these structures are exposed to lateral buckling. In this research, the use of Carbon Fiber Reinforced Polymer (CFRP) rings to enhance and increase the buckling strength of tanks has been investigated. For this study, a tank with dimensions close to the actual tanks has been built and reinforced by a CFRP ring against the buckling. The results of the experiment indicated that the use of CFRP reinforcing ring considerably enhanced the buckling and post-buckling capacity of the tank. Further, comparing the results obtained from the experimental and numerical analysis and the values extracted from the theoretical relationships suggested that the results are in good agreement.

کلیدواژه ها:

Buckling strength ، Carbon Fiber Reinforced Polymer Rings ، Semi-Scale Tank ، storage tanks

نویسندگان

siros khatuni

Urmia University - Faculty of Engineering

Hossein showkati

Department of Civil Engineering, Urmia University, Urmia, Iran