Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers

سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 246

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJE-33-8_004

تاریخ نمایه سازی: 4 شهریور 1399

چکیده مقاله:

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending single length glass fiber and single length steel fiber with a total volume fraction of 1.65% into the concrete and Hybrid Graded Fiber Reinforced High Strength Concrete (HyGrFR-HSC) mixes were obtained by mixing different lengths of glass fiber with different length of steel fibers at a total volume fraction of 1.65% into the concrete. A comparative study was made between HyFR-HSC and HyGrFR-HSC specimens to investigate the effect of fiber grading on strength properties and the uniaxial compressive behaviour of HSC with hybrid fibers. In both HyFRC and HyGrFRC mixes, glass fibers improved the pre-peak behaviour, and steel fibers improved the post-peak behaviour of concrete, thereby exhibiting a positive synergy in combining glass and steel fiber into the concrete. Among the two-hybrid FRC’s, HyGrFRC outperformed HyFRC with substantial improvement in both strength and ductility. Among all the HyGrFRC mixes, HyGr9 mix, which contain a higher amount of long-length fibers exhibited better improvement in peak strain, ductility factor, total energy and toughness index. The replacement of single length of fibers with graded length fibers at higher volume fraction in HyFRC is useful in improving workability, thereby providing better fiber dispersion and thus enhances both the pre-peak and post-peak performance of the concrete. From this investigation, it can be inferred that grading of fibers improved the mechanical behaviour of HyFRC by exhibiting positive synergy from both fiber geometry and fiber type.

کلیدواژه ها:

Crimped steel fiber ، Alkali-resistant glass fiber ، high strength concrete ، Hybrid Fiber Reinforced High Strength Concrete ، Hybrid Graded Fiber Reinforced High Strength Concrete

نویسندگان

S. R. R. Teja Prathipati

Department of Civil Engineering, National Institute of Technology Warangal, Telangana, India

C. B. K. Rao

Department of Civil Engineering, National Institute of Technology Warangal, Telangana, India

N. R. Dakshina Murthy

Civil Engineering Department, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad, Telangana State, India

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Ramtekkar, Gangadhar, Shirish Deo, and Badrinarayan Rath. Durable glass fiber ...
  • Gettu, Ravindra, Zdenek P. Bazant, and Martha E. Karr. Fracture ...
  • Wong, John Kok Hee, Sien Ti Kok, and Soon Yee ...
  • Chowdary, Bhavita, V. Ramanamurty, and Rakesh J. Pillai. Fiber reinforced ...
  • Majeet, Anas Hameed, and Ahmad Jabbar Hussain Alshimmeri. The Performance ...
  • Paluri, Yeswanth, Sudhakar Mogili, Heeralal Mudavath, and Rathish Kumar Pancharathi. ...
  • Khamees, Shahad S., Mohammed M. Kadhum, and Nameer A. Alwash. ...
  • Hilles, Mahmoud M., and Mohammed M. Ziara. Mechanical Behavior of ...
  • Betterman, L. R., C. Ouyang, and Surendra P. Shah. Fiber-matrix ...
  • Dawood, Eethar Thanon, and Mahyuddin Ramli. Contribution of hybrid fibers ...
  • Vandewalle, Lucie. Hybrid fiber reinforced concrete. Measuring, monitoring and modeling ...
  • Shubbar, Hasanain A., and Nameer A. Alwash. The Fire Exposure ...
  • Prathipati, SRR Teja, and C. B. K. Rao. A study ...
  • Salim, Lamyaa Gh, Haider M. Al-Baghdadi, and Haitham H. Muteb. ...
  • Xu, Lihua, Le Huang, Yin Chi, and Guodong Mei. Tensile ...
  • Kasagani, Hanuma, Sri Ram Ravi Teja Prathipati, and Chittem Butchi ...
  • Kasagani, Hanuma, and C. B. K. Rao. Effect of graded ...
  • Ahmed, Shaikh Faiz Uddin, and Hirozo Mihashi. Strain hardening behavior ...
  • ASTM C61-12a, Standard Specification for Coal Fly Ash and Raw ...
  • ASTM C192 / C192M-16a, Standard Practice for Making and Curing ...
  • نمایش کامل مراجع