Analysis and Design Procedure of Corner Gusset Plate Connection in BRBFs

سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 1,249

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJEE-4-3_014

تاریخ نمایه سازی: 1 اردیبهشت 1393

چکیده مقاله:

In order to achieve the post buckling strength of BRB member, AISC seismic design provisions require that gusset plate axial capacity exceed ultimate compressive load of the BRB. The AISC code alsorequires that the gusset plate instability be considered because recent full scale tests demonstrated that outof plane buckling of a gusset plate occurs prior to BRB ultimate load. In this paper an analytical investigation is used to investigate inelastic compressive behavior and strength of gusset plates in BRBFs by finite element software considering plates of different dimensions. In order to verify analytical results one full scale tests wascarried out on a simplified gusset plate connection. Also to increase gusset plate buckling strength and improveits energy absorption behavior, effects of adding free edge stiffeners at different sizes have been investigatedand the results are presented. Finally, a design method accompanied by some design charts for rectangular type gusset plates subject to compression is proposed based on an inelastic plate buckling equation

کلیدواژه ها:

Buckling restrained brace /Gusset plate /Analytical investigation /Plate buckling /Gusset plate design

نویسندگان

m Naghipour

Department of Civil Engineering, Babol University of Technology, Babol, Iran

g Abdollahzadeh

Department of Civil Engineering, Babol University of Technology, Babol, Iran

m Shokri

Department of Civil Engineering, Babol University of Technology, Babol, Iran