Prediction of the Effects of Combustion–Generated Pollutant on Human Health: Mathematical Models and Numerical Solutions

سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 332

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJEE-7-3_004

تاریخ نمایه سازی: 6 شهریور 1396

چکیده مقاله:

The rapid increase in technological innovations and utilizations have adversely affected the environment and consequently continued to constitute a threat to the future survival of human. To counter these assaults and the threats of further degradation of the environment and human health, thebasic recommended approach for predicting the impact of the pollution and for the determination of the risk assessment strategies is through the use of mathematical models. Therefore, this work presentsmathematical models for the prediction of the effects of combustion generated pollutants, such as Carbon-monoxide (CO) on human health. The developed coupled system of nonlinear partialdifferential equation for the ambient concentration of carbon mono-oxide in which the human subject was exposed to and the concentration of Carboxyhemoglobin (COHb) in the blood is solvednumerically using Alternating-Direct Implicit (ADI) scheme. From the computations, the variables of the models show significant results in their variations and the standard error of the predicted resultsfrom the model range in between 0.5-0.85 for the different concentrations of ambient carbon monoxide. This established that the computed results show good agreement with availableexperimental data. Therefore, the model can be used as a means of controlling the effects of the pollutant on human health and the results will serve as a way of evaluating our technological injuries, effectively controlling our pollutants emissions and also as a tool for designing and developing better equipments and engines with lower carbon or pollutants emissions.

نویسندگان

M. G. Sobamowo

Department of Mechanical Engineering, University of Lagos, Akoka, Lagos, Nigeria