A Study on removal of chromium from tannery effluent treatment of chrome tanning waste water using tannery solid waste
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 293
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJHCUM-1-4_001
تاریخ نمایه سازی: 21 فروردین 1397
چکیده مقاله:
This study illustrates the process of removal of chromium from chrome tanning waste-water by fly ash which was drive from chrome shaving dust. This experiment was carried out in a batch process with laboratory preparedadsorbent samples and chrome tanning water collected from local tanneries. The influence of various factors likes adsorbent doses, contact time, and initial concentration of chromium on the removal of chromium from effluent was investigated. FTIR analysis was done to identify the functional groups presents in the fly ash. The maximum removal of chromium and absorption capacity was found to be 97.86%. And 23.11 mg/g at chromium concentration of 1000.3mg/ l and 1291 mg/l respectively. Total dissolve solid, turbidity, and conductivity were reduced significantly. Waste water samples containing several interfering ions like Na, Fe, Ca, Zn, Mn etc. The langmuir absorption isotherm was also used to explain the nature of adsorption. This result indicates that chrome shaving dust ash can be successfully used to treat chrome tanning wastewater.
کلیدواژه ها:
نویسندگان
A Rahaman
Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-۱۲۰۹, Bangladesh
Md R. Hosen
Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-۱۲۰۹, Bangladesh
M. A Hena
Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-۱۲۰۹, Bangladesh
U. H. B Naher
Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-۱۲۰۹, Bangladesh