Effect of Molar Ratio and Resin Modification on the Protection Properties of Zinc-rich Alkali Silicate Primer
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 429
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJOGST-3-1_005
تاریخ نمایه سازی: 18 اسفند 1397
چکیده مقاله:
The influence of increasing the SiO2/K2O molar ratio on the electrochemical action of a waterborne potassium silicate zinc-rich coating was investigated by means of electrochemical impedance spectroscopy (EIS) and corrosion potential (Ecorr) measurements. The EIS results showed that increasing the SiO2/K2O molar ratio in the range of 3.135 to 5 by the addition of nano-SiO2 to the resins improved the resistance of coatings; however, higher molar ratios showed an adverse effect. Moreover, the alkali silicate binder of the sample with a SiO2/K2O molar ratio of 5 was improved by adding 5, 10, and 15 wt.% of acrylic resin and acrylic/styrene copolymer to potassium silicate resin. These formulated coatings were sprayed over carbon steel plates and the adhesion and morphology of these primers were evaluated by pull-off, cross cut, and scanning electron microscopy tests. Electrochemical measurements showed that the sample with a SiO2/K2O molar ratio of 5 had better corrosion properties than the other samples. Adhesion and SEM tests also showed that B1 and C2 with respectively 5 and 10% acrylic derivatives had less holes, cracks, and better adhesive properties.
کلیدواژه ها:
نویسندگان
Iman Mirzaei Goodarzi
Department of Technical Inspection, Petroleum University of Technology, Abadan, Iran
Mansour Farzam
Department of Technical Inspection, Petroleum University of Technology, Abadan, Iran
Mohammad Reza Shishesaz
Department of Technical Inspection, Petroleum University of Technology, Abadan, Iran
Davood Zaarei
Department of Polymer, Technical Faculty, South Tehran Branch, Islamic Azad University, Tehran, Iran