Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 389
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-3-2_003
تاریخ نمایه سازی: 1 اردیبهشت 1397
چکیده مقاله:
In this work, effects of different tool pin profiles of flat and tapered shoulder geometries on the peak temperature in friction stir welding are investigated analytically. The developed models used for the analytical investigations considered the welding process as a combination or mixture of the pure sliding and the pure sticking. From the results, the amount of heat generation and the peak temperature are directly proportional to the number of edges in the pin profiles in such a way that the heat generated and peak temperature in the profiles increases from the triangular pin profile to hexagonal pin profile. Also, the rate of heat generation and the peak temperature in flat shoulder are greater than in tapered/conical shoulder. The results in this work are validated with experimental and the past theoretical results and good agreements are achieved
کلیدواژه ها:
Frictional stir welding ، Peak temperature ، Different tool pin Profiles ، Analytical investigations
نویسندگان
M. A. Waheed
Department of Mechanical Engineering, Federal University of Agriculture, Abeokuta, Nigeria
L. O. Jaiyesimi
Works and Physical Planning Department, University of Lagos, Akoka, Lagos, Nigeria.
S. O. Ismail
Department of Mechanical Engineering, Federal University of Agriculture, Abeokuta, Nigeria.
O. U. Dairo
Department of Civil Engineering, Federal University of Agriculture, Abeokuta, Nigeria.