Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 47، شماره: 2
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 305
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-47-2_009
تاریخ نمایه سازی: 21 فروردین 1397
چکیده مقاله:
Adhesive bonding technology is being used in a variety of modern industries, including the automotive, aerospace, maritime, construction, defense and so on. On the other side, polymeric nano - composites attracted both academic and industrial interests in the past decades. The scope of this paper is experimental investigation on the effects of the addition of Alpha-alumina nanoparticles to the woven glass / epoxy composite and Araldite 2015 adhesive on the mechanical properties of the composite adhesive bonded joints. In this study, vacuum assisted resin transfer molding was used to fabricate experimental samples and to fabricate composite samples, 6 glass-fiber layers with a surface density of 200 g/m2 were used. The study of the influences of the addition of Alpha-alumina nanoparticles with different weight ratios to glass/epoxy composites suggests that the maximum values of the ultimate strength, elongation, toughness, and Young’s modulus belong to the samples with the weight ratios of 0.43, 1, 1, and 2.1%,respectively. The experimental results from the shear tensil e test show that the incorporation of 0.74 wt% of nanoparticles to the adhesive increases the joint strength by about 14%.
کلیدواژه ها:
نویسندگان
p Ghabezi
PhD, Student, School of Mechanical Engineering, College of Engineering, University of Tehran
Mahdi Farahani
Assistant Professor, School of Mechanical Engineering, College of Engineering, University of Tehran