New UWB Shielding with Frequency Selective Surfaces
محل انتشار: دوفصلنامه مهندسی مخابرات، دوره: 6، شماره: 1
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 402
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCESH-6-1_005
تاریخ نمایه سازی: 22 مهر 1398
چکیده مقاله:
In this paper a Frequency Selective Surface (FSS) as a UWB electromagnetic shield is introduced. The proposed FSS comprises a quasi-J.C-Jerusalem Cross- and a copper ring, which are located at both sides of a FR4 substrate and can represent a S.E -Shielding Effectiveness- better than 20dB in 90% bandwidth of Ultra Wide Band frequency. This structure is compact and thin. Each cell comprises J.C elements and a ring at two sides of a FR4 board with 3.2mm thickness, dielectric constant of 4.4, and loss tangent of 0.02. The structure has a 24×36 elements with dimensions of 288×432mm. Also the simulation and measurement results are in good agreement.
کلیدواژه ها:
نویسندگان
Mojtaba Mighani
Shahid Sattari Aeronautical University of Science and Technology
Alireza Mallahzadeh
Department of Electrical Engineering, Shahed University