The Effect of Travel and Rotational Speeds on the Mechanical Properties of Al2024 in Underwater Friction Stir Welding

سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 374

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JEFM-1-2_003

تاریخ نمایه سازی: 25 تیر 1398

چکیده مقاله:

In this research, the friction stir welding was performed underwater in order to evaluate and improve the mechanical properties of aluminum 2024 alloy. Welding samples were compared with the samples in the air welding. The results showed that samples of the underwater welding in case the rotational speed is 1000 RPM and feed rate is in 80 mm/min, has the highest tensile strength, also they obtain the highest hardness at a rotational speed of 1000 RPM and forward speed of 100 mm/min. Also, an increase of travel speed reduces deformation of the material, heat input and soft area width during the welding process and increases hardness of TMAZ and HAZ. With increasing rotational speed, heat input and soft area width increased. This will, on the one hand, decrease the hardness of TMAZ and HAZ and, on the other hand, increase the stiffness of the disturbance area. Increasing hardness also ultimately improves the tensile strength of the welding joint.

نویسندگان

R. Azarafza

University Complex Materials and Manufacturing Technologies of Maleke Ashtar University, Tehran, Iran.

A. Rabieifar

Department of Materials Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.

A. Rezaei

University Complex Materials and Manufacturing Technologies of Maleke Ashtar University, Tehran, Iran.

S. Nategh

Materials Science and Engineering Department, Sharif University of Technology, Tehran, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • P. L. Threadgill, A. J. Leonard, H. R. Shercliff and ...
  • R. Mirjalili, The Study of Microstructure and Mechanical Properties of ...
  • Hua-Bin Chen, K. Y. Mishra, Mater. Sci. Eng. R, 50(2005), ...
  • M. Mirazizi, The Friction-Stir Welding of Al7075 Alloy, Master s ...
  • H. Liu, J. Mater. Process. Technol., 142(2003), 692. ...
  • R. Rao, H. Raikoty, and G. talia, Structural Dynamics and ...
  • Y. S. Sato, H. Kokawa, M. Enmoto and S. Jogan, ...
  • H. Sabet, M. Sadeghi, M. Mohammadihkah, N. Mirzamohamad and M. ...
  • Z. M. L. C. S. R. Ren, Scripta Mater., 56(2007), ...
  • W. Tang, X. Guo, J. C. McClure and L. E. ...
  • N. Rajamanickam, V. Balusamy, R.G. Madhusudhanna and K. Natarajan, Mater. ...
  • Y. M. Hwang, Z. W. Kang, Y. C. Chiou and ...
  • T. Hirata, T. Oguri, H. Hagino, T. Tanaka, S. W. ...
  • C. G. Rhodes, M. W. Mahoney, W. H. Bingel, R. ...
  • M. Guerra, J. C. McClure, L. E. Murr, A. C. ...
  • W. Tang, X. Guo, J. C. McClure and L. E. ...
  • P. Vilaca, L. Quintino and J. F. Santos, J. Mater. ...
  • نمایش کامل مراجع