Comparison of Traditional and Semi-mechanized Palm Oil Processing Approaches in Nigeria; Implications on Biodiesel Production
محل انتشار: فصلنامه روشهای تصفیه محیط، دوره: 3، شماره: 2
سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 296
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JETT-3-2_004
تاریخ نمایه سازی: 15 شهریور 1395
چکیده مقاله:
Oil palm processing is a source of livelihood to many rural families in the Niger Delta, Nigeria. About 80% palm oil processors are smallholders who basically employ manual equipment for processing. In this study, the processes of crude palm oil (CPO) production from fresh fruit bunch were compared between semi-mechanized and traditional processors in Niger Delta Nigeria. The study found that both approaches share the same processing steps like bunch reception, fermentation before threshing, sieving and digestion whereas steps like slicing, fermentation of PPF were typical of only traditional approach. Oil drying was peculiar to only semi-mechanized mill. Though, both methods of processing result to low quality CPO, but semi-mechanized quality is slightly better. The processing duration was shorter in semi-mechanized as compared to traditional approach. The quality of CPO produced by both approaches could be a challenge during transesterification process in biodiesel production
کلیدواژه ها:
نویسندگان
Sylvester Chibueze Izah
Bioenergy and Environmental Biotechnology Research Unit, Department of Biological Sciences, Faculty of Science, Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria.
Elijah Ige Ohimain
Bioenergy and Environmental Biotechnology Research Unit, Department of Biological Sciences, Faculty of Science, Niger Delta University, Wilberforce Island, Bayelsa State, Nigeria.