A Monte Carlo simulation technique for assessment of earthquake-induced displacement of slopes
محل انتشار: مجله معدن و محیط زیست، دوره: 9، شماره: 4
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 312
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-9-4_013
تاریخ نمایه سازی: 18 تیر 1398
چکیده مقاله:
The dynamic response of slopes against earthquake is commonly characterized by the earthquake-induced displacement of slope (EIDS). The EIDS value is a function of several variables such as the material properties, slope geometry, and earthquake acceleration. This work is aimed at the prediction of EIDS using the Monte Carlo simulation method (MCSM). Hence, the parameters height, unit specific weight, cohesion, friction angle, vibration duration, and maximum horizontal acceleration are used to predict the EIDS values. To do this, a multiple non-linear regression relationship is first derived between EIDS and the independent variables. Then MCSM is performed based on the developed regression equation. The results obtained demonstrate that the stochastic approach used is able to successfully reproduce the EIDS values and calculate the confidence intervals. The average of the measured and simulated values for EIDS was 4.34 cm and 4.48 cm, respectively. Eventually, the results of a performed correlation sensitivity analysis revealed that the maximum horizontal acceleration had the greatest impact on EIDS.
کلیدواژه ها:
نویسندگان
H. Fattahi
Department of Mining Engineering, Arak University of Technology, Arak, Iran
N. Babanouri
Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran
Z. Varmaziyari
Department of Mining Engineering, Arak University of Technology, Arak, Iran