Analysis of Thermal-Bending Stresses in a Simply Supported Annular Sector Plate

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 244

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JSMA-11-4_003

تاریخ نمایه سازی: 12 اسفند 1398

چکیده مقاله:

The present article deals with the analysis of thermal-bending stresses in a heated thin annular sector plate with simply supported boundary condition under transient temperature distribution using Berger’s approximate methods. The sectional heat supply is on the top face of the plate whereas the bottom face is kept at zero temperature. In this study, the solution of heat conduction is obtained by the classical method. The thermal moment is derived on the basis of temperature distribution, and its stresses are obtained using thermally induce resultant moment and resultant forces. The numerical calculations are obtained for the aluminium plate in the form of an infinite series involving Bessel functions, and the results for temperature, deflection, resultant bending moments and thermal stresses have been illustrated graphically with the help of MATHEMATICA software.

نویسندگان

T Dhakate

Department of Mathematics, Mahatma Gandhi Science College, Armori, Gadchiroli, India

V Varghese

Department of Mathematics, Sushilabai Bharti Science College, Arni, Yavatmal, India

L Khalsa

Department of Mathematics, Mahatma Gandhi Science College, Armori, Gadchiroli, India

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Hetnarski R. B.,2012, Encyclopedia of Thermal Stresses, Springer. ...
  • Nowacki W., 1962, Thermoelasticity, Addison Wesley, NY. ...
  • Chia C. Y., 1978, Nonlinear Analysis of Plates, McGraw Hill. ...
  • Berger H.M.,1955, A new approach to an analysis of large ...
  • Tauchert T. R., 2014, Large Plate Deflections, Berger’s Approximation, Encyclopedia ...
  • Basuli S., 1968, Large deflection of plate problems subjected to ...
  • Biswas P., 1976, Large deflection of a heated semi-circular plate ...
  • Datta S., 1976, Large deflection of a semi-circular plate on ...
  • Nowinski J.L., Ohnabe H., 1972, On certain inconsistencies in Berger ...
  • Iwinski T., Nowinski J. L., 1957, The problem of large ...
  • Nowinski J. L., 1958, MRC Technical Summary Report No.34, Mathematics ...
  • Nowinski J. L., 1958, MRC Technical Summary Report No.42, Mathematics ...
  • Nowinski J. L., 1958, MRC Technical Summary Report No.67, Mathematics ...
  • Okumura I.A., Honda Y., Yoshimura J., 1989, An analysis for ...
  • Wang C.M., Lim G.T., 2000, Bending solutions of sectorial Mindlin ...
  • Golmakani M.E., Kadkhodayan M., 2013, Large deflection thermoelastic analysis of ...
  • Eren I., 2013, Analyses of large deflections of simply supported ...
  • Sitar M., Kosel F., Brojan M., 2014, A simple method ...
  • Bakker M.C.M., Rosmanit M., Hofmeyer H., 2008, Approximate large-deflection analysis ...
  • Jang T.S., 2014, A general method for analysing moderately large ...
  • Choi I.H., 2017, Low-velocity impact response analysis of composite pressure ...
  • Bhad P., Varghese V., Khalsa L., 2017, A modified approach ...
  • Boley B. A., Weiner J.H., 1960, Theory of Thermal Stresses, ...
  • Ventsel E., Krauthammer T., 2001, Thin Plates and Shells-Theory Analysis, ...
  • Wang M. Z., Xu X.S.,1990, A generalization of Almansi’s theorem ...
  • نمایش کامل مراجع