Silver Doped TiO2 Nanoparticles: Preparation, Characterization and Efficient Degradation of 2,4-dichlorophenol Under Visible Light

سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 327

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JWENT-1-2_007

تاریخ نمایه سازی: 23 آبان 1397

چکیده مقاله:

Hydrothermally synthesized TiO2 nanoparticles containing different amounts of silver were characterized by X-Ray diffraction (XRD), Fourier transform infrared (FT-IR) and scanning electron microscopy equipped with energy dispersive X-ray microanalysis (SEM/EDX) techniques. XRD results showed prepared samples include 100% anatase phase. The presence of silver in TiO2 nanoparticle network was established by XRD, SEM/EDX and FT-IR techniques. The photocatalytic performance of the prepared catalysts was tested for the degradation of 2,4-dichlorophenol (2,4-DCP) under visible light.. The experiments demonstrated that 2,4-DCP was effectively degraded in the presence of Ag/TiO2 samples. It was confirmed that the presence of Ag on TiO2 catalysts could enhance the photocatalytic degradation of 2,4-DCP in aqueous suspension. It was found that an optimal dosage of 1.68 wt% Ag in TiO2 achieved the fastest 2,4-DCP degradation (95% after 180 min irradiation) under the experimental conditions. On the basis of variouscharacterizations of the photocatalysts, the reactions involved to expla in the photocatalytic activity enhancement due to Ag doping include a better separation of photogenerated charge carriers. GC-MS analysis showed the major intermediates of 2,4-DCP degradation are simple acids like oxalic acid, acetic acid, etc. as the final products.

کلیدواژه ها:

نویسندگان

Zahra Sarteep

Fouman Faculty of Engineering, College of Engineering, University of Tehran, Tehran, Iran

Azadeh Ebrahimian Pirbazari

Fouman Faculty of Engineering, College of Engineering, University of Tehran, Tehran, Iran,Caspian Faculty of Engineering, College of Engineering, University of Tehran, Tehran, Iran

Mohammad Ali Aroon

Caspian Faculty of Engineering, College of Engineering, University of Tehran, Tehran, Iran