Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 430

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_TAVA-5-1_001

تاریخ نمایه سازی: 27 آذر 1398

چکیده مقاله:

Ultrasonic energy is used for applying severe plastic deformation on metal surfaces. In the present work, the effect of ultrasonic vibration on the formability, microhardness and microstructural properties of St14 steel sheet has been investigated. To be precise, a semi-hemispherical-head forming tool had shaped the specimens until the necking started to happen. Conventional as well as the ultrasonic-assisted biaxial stretch forming test has been performed on St14 steel sheets and obtained data has been used to compare the hardness and microstructure of the specimen with and without superimposing the ultrasonic vibration. It was observed that the hardness of the samples which have been shaped by applying ultrasonic vibrations to the tool with an amplitude of 15µm at 20.5 kHz increased significantly in compared with the samples which have been shaped without using ultrasonic vibration, revealing the efficiency of the ultrasonic operation in increasing the hardness.

نویسندگان

Nima Najafizadeh

M.Sc. student,School of Mechanical Engineering, Iran University of Science and Technology,Tehran, Iran

Majid Rajabi

Assistant Professor, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, , Iran

Ramin Hashemi

Assistant Professor, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, , Iran

Saeid Amini

cDepartment of Manufacturing, Faculty of Mechanical Engineering, Kashan University, Kashan, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • A. Amanov, I. Cho, Y. Pyoun, C. Lee, I. Park, ...
  • E. Hall, The deformation and ageing of mild steel: III ...
  • S. Bagherzadeh, K. Abrinia, Q. Han, Ultrasonic assisted equal channel ...
  • F. Blaha, B. Langenecker, Dehnung von zink-kristallen unter ultraschalleinwirkung, Naturwissenschaften, ...
  • H. Storck, W. Littmann, J. Wallaschek, M. Mracek, The effect ...
  • A. Pak, A. Abdullah, An Approach to Designing a Dual ...
  • A. Siddiq, T. El Sayed, Ultrasonic-assisted manufacturing processes: variational model ...
  • A. Eaves, A. Smith, W. Waterhouse, D. Sansome, Review of ...
  • Y. Long, Y.N. Li, J. Sun, I. Ille, J. Li, ...
  • A. Karimi, S. Amini, Steel 7225 surface ultrafine structure and ...
  • S. Bagherzadeh, K. Abrinia, Y. Liu, Q. Han, The effect ...
  • M. Vahdati, R. Mahdavinejad, S. Amini, Investigation of the ultrasonic ...
  • F. Djavanroodi, H. Ahmadian, K. Koohkan, R. Naseri, Ultrasonic assisted-ECAP, ...
  • Y. Liu, Q. Han, L. Hua, C. Xu, Numerical and ...
  • Y. Ashida, H. Aoyama, Press forming using ultrasonic vibration, Journal ...
  • J.-C. Hung, C.-C. Lin, Investigations on the material property changes ...
  • X. Liu, Y. Osawa, S. Takamori, T. Mukai, Microstructure and ...
  • L. Qingmei, Z. Yong, S. Yaoling, Q. Feipeng, Z. Qijie, ...
  • Z. Shao, Q. Le, Z. Zhang, J. Cui, A new ...
  • E. Bitzek, P. Gumbsch, Dynamic aspects of dislocation motion: atomistic ...
  • F. Ahmadi, M. Farzin, M.J.U. Mandegari, Effect of grain size ...
  • نمایش کامل مراجع