The comparison of two approaches Jiles–Atherton and Preisach in simulating hysteresis cycle
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 340
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
KBEI02_276
تاریخ نمایه سازی: 5 بهمن 1395
چکیده مقاله:
several physical models for simulating the hysteresis loop have been proposed that the implementation of some of these models is very complex and time-consuming and needs much data. In many technical applications, an exact mathematical model of the magnetic characteristics of the magnetic materials B-H is required to calculate the magnetic field in rotating machinery or other electromagnetic systems. Two common methods for simulation of hysteresis loops are Preisach and Jiles–Atherton Models. In this paper, at first we describe them, after that, the two methods are used to simulate the hysteresis loop using Labview software. The results of the simulation clearly show the relative superiority of the Jiles–Atherton's method.
کلیدواژه ها:
نویسندگان
Maziar Fallahnejad
M.Sc. On Control Engineering, Technical and vocational junior college of Astaneh-ye Ashrafiyeh, Guilan, Iran Technical and vocational university
Hossein Afrakhte
Assistant professor, Faculty of Engineering, Department of Electrical Engineering, Guilan University