Recrystallization of WE43 magnesium alloy processed via cyclic expansion extrusion (CEE)
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 546
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECCONF01_050
تاریخ نمایه سازی: 5 آبان 1397
چکیده مقاله:
In this paper, cyclic expansion extrusion (CEE) asa relatively new severe plastic deformation (SPD) process isapplied to a rare earth (RE) containing Mg alloy WE43 and theeffects of processing temperature and the number of passes areinvestigated. Results showed that dynamic recrystallization (DRX)occurred after CEE processing at 400 °C and a bimodal structure withultrafine DRXed grains surrounded the unrecrystallized grains.However, at 330 °C, DRX was retarded due to the existence of rareearth elements. It was concluded that increasing the processingpasses could increase volume fraction of the recrystallizedgrains. Also increasing the temperature results in an increase inelongation.
کلیدواژه ها:
نویسندگان
M Sadrkhah
master student, college of mechanical engineering, university of Tehran, Iran
Gh Faraji
Ghader Faraji, college of mechanical engineering, university of Tehran, Iran
S Amani
master student, college of mechanical engineering, university of Tehran, Iran