Optimizing the layup and fabrication of the composite spar of a wind turbine blade
محل انتشار: سومین کنفرانس بین المللی مهندسی مکانیک و هوافضا
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 532
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHAERO03_019
تاریخ نمایه سازی: 5 آبان 1397
چکیده مقاله:
One of the most important parts of a wind turbine is mechanical design of blade and it should be done carefully because of variable condition of exploiting and applying extreme loads. This paper puts focus on the process of mechanical design of wind turbine blade shell. Layup of composite plates which is used in wind turbine blade is one of the most important things in mechanical design in order to achieve maximum strength and minimum weight. Promal is software for mechanics of composite material and has been used for analyzing forces acting on blade shell and designing shell blade to achieve minimum weight and maximum strength. Considered load is one of the most critical cases among all states of loading blades during operation. Full factorial experiment was used to achieve this goal. The final result is how to arrange glass/epoxy composite laminate sheets in blade shell with its specifications, including weight and strength.
کلیدواژه ها:
نویسندگان
Seyed Sajjad Kiani
Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak
Ali Mazaheri
Department of Mechanical Engineering, Islamic Azad University, khomeini shahr ،Iran
Mehdi Rasafchi
Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak