The Investigation of a Laboratory Homemade Desiccant Wheel System Performance Under Four Different Hot and Humid Weather Conditions of Iran

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,680

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

MEDC01_001

تاریخ نمایه سازی: 11 شهریور 1391

چکیده مقاله:

An experimental setup is designed and constructed in order to test the performance characteristics of a laboratory desiccant wheel. the tested 20cm diameter wheel was also designed and constructed using aluminum corrugated foil coated by silicagel powders.the performance of the wheel was investigated in some different weather conditions of Iran. The weather conditions in some Iran cities such as Mahshahr port, Gorgan, Rasht and Chabahr were simulated using an environmental condition test chamber which is enable to provide conditioned air in a vast rnge of temperature and humidity. It is found that, the best moisture removal capacity (MRC) occurs in Rasht and Chabahar using 60°C regeneration air. Regeneration specific heat input (RSHI) was also measured and calculated, again best results were belong to Rasht and Chabahar.the measured desiccant coefficient of performance (DCOP) was between 0.3 up to 9 in different climate conditions and different test conditions.

نویسندگان

Hosein alipour, S. M.

Department of Mechanical Engineering, Iran University of Science and Technology Tehran, Iran

Movahed Eshghi

Department of Mechanical Engineering, Iran University of Science and Technology Tehran, Iran