The Effects of V and Cr Addition on the Deformation Mechanisms and Mechanical Behavior of a Binary TiAl Alloy

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,490

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NAMIC01_091

تاریخ نمایه سازی: 18 تیر 1391

چکیده مقاله:

In the present study, to determine the influence of the Vanadium and Chromium additions on the deformation mechanisms of the TiAl based alloys, theoretical and experimental approaches were used. In one hand, the changes of electronic structure parameters in the lattice of ternary TiAl alloys were calculated by employing the discrete variational Xα cluster method. Calculations were set such to consider the ternary TiAl containing third alloying elements for about 2 at.% in the hypothetical composition. Parameters changes of the bond strength, the bonding anisotropy ratio and the lattice resistivity to the micro-deformations, by addition of V and Cr alloying elements were calculated and discussed. In the other hand, experimental tension tests were designed and carried out at ambient temperature on the standard samples of the Ti-48Al, Ti-48Al-2V and Ti-48Al-2Cr alloys which produced with the similar compositions to those calculated. Calculations results show that addition of V and Cr alloying elements to binary TiAl can increase the yield strength of the alloy by increasing the lattice resistivity to motion of preferred dislocations. Also, addition of both the Cr and V alloying elements results in improving the ductility of TiAl alloys by reducing the resistance of the lattice to motion of the l/2<110] ordinary dislocation and 1/2<112] superdiclocation relative to the <011] superdislocation which is in agreeing with the experimental results. Moreover, Results show that the Cr addition has more ductilizing effect on the binary TiAl compared to the V because of the fact that addition of Cr has a larger influence on nearing the tetragonal ratio to unity

نویسندگان

Siavash Zamani

Department of Materials and Metallurgical Engineering, Iran University of Science and Technology, Tehran, Iran

Hekmat Razavizadeh

Department of Materials and Metallurgical Engineering, Iran University of Science and Technology

Mohammad Jahazi

Department of Mechanical Engineering, Ecole de Technologie Superieure, Montreal, Canada

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Kim, Y.-W and Dimiduk, D. M., Progress in the understanding ...
  • Morinaga, M., Saito, J., Yukawa, N. and Adachi, H., Electronic ...
  • Whang, S. H. and Hahn, Y. D., High- Temperature Ordered ...
  • Addition of Chromium has more ductilizing effect in comparison with ...
  • Society Symposium Proceedings, Vol. 133, 1989, pp. 687-692. ...
  • Huang, S.-C. and Hall, E. L., The effects of Cr ...
  • Huang, S.-C. and Hall, E. L, Microstructure and deformation of ...
  • Proceedings., Vol. 133, 1989, pp. 373-383. ...
  • Greenberg, B. A., Antonova, O. V., Indenbaum, V. N., Karkina, ...
  • Novoselova, T., Malinov, S. and Sha, W., Experimental study of ...
  • Ellis, D. E. and Parinter, G. S., Discrete variational method ...
  • Pople, J. A. and Beveridge, D. L., Approximate Molecular Orbital ...
  • Zou, J. and Fu, C. L, Structural, electronic and magnetic ...
  • Kawabata, T., Tamura, M. and Izumi, O., Effect of Ti/Al ...
  • Tsujimoto, T., Hashimoto, K. and Nobuki, M., Alloy design for ...
  • Hashimoto, K., Nobuki, M., Doi, H., Kimura, T., Tsujimoto, T. ...
  • Viguier, B., Hemker, K. J., Bonneville, J., Louchet, F. and ...
  • Huang, S.-C., Hall, E. L, Characteri zation of the effect ...
  • Kawabata, T., Tamura, M. and Izumi, O., Parameters for ductility ...
  • Proceedings, Vol. 133, 1989, pp. 329-334. ...
  • نمایش کامل مراجع