Seismic Retrofitting by using Friction damper in Horizontally Irregular Infilled Structures
محل انتشار: ششمین کنگره ملی مهندسی عمران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,290
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCCE06_0324
تاریخ نمایه سازی: 28 مرداد 1390
چکیده مقاله:
Steel frames with masonry infill walls are common systems in the ordinary residential structures.High stiffness value of the infill walls has significant effect on the behavior of structure, torsional problem is the one them. A friction damper device can be used to minimize torsional effects in the structure. Nonlinear analysis and modeling of the infill walls and the damper is done by Opensees [1]. Results show that the presence of infill walls can lead to severe torsion increase through the frame which can be solved by using friction damper device. This technique can benefit the complete capacity of structure with minimum intervention in the structure and architecture
کلیدواژه ها:
نویسندگان
M. R. Tabeshpour
۱- Faculty of Engineering sabzevar Tarbiyat moalem University
A. Azad
Civil Engineering Department Sharif University Kish Campus
A. A. Golafshani
Civil Engineering Department Sharif University