OCR of Clays by CPTu data using EPR method

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,235

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCCE08_0803

تاریخ نمایه سازی: 5 مهر 1393

چکیده مقاله:

Four different models have been developed and tested using evolutionary polynomial regression method. Considering three clay types including intact, fissured and leda clays, three polynomial models have been presented for each one and a fourth one for all clay types using a wide range database of in-situ (CPT)and laboratory (oedometer) tests. Models have been tested using new data (not used in training stage) and comparing with target OCR values. Results were in good agreement with reference values from laboratory tests and have been compared with existing methods. Overall, models have good performance in comparison to available approaches

کلیدواژه ها:

نویسندگان

Amir Hozouri

Project Manager, SES Geotechnical Engineering Consultants and Contractors

Sajjad Rezaie

M.S., Tehran University

Ashkan Nafisi

M.S., Sharif University of Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Lunne, T. and P. Robertson, Cone penetration testing in geotechnical ...
  • Robertson, P. and R. Campanella, Interpretation of cone penetrometer tests, ...
  • Sandven, R., Strength and deformation properties of fine grained soils ...
  • 24 4.2 2.6 0.71 l.39 1.15 ...
  • Mayne(1994) Sully et al(1988) ANN SVM ...
  • Mayne(1994) Sully et al(1988) ANN SVM ...
  • Mayne(1994) Sully et al(1988) ANN SVM ...
  • Mayne(1994) Sully et al(1988) ANN SVM ...
  • Chen, B. and P. Mayne, Profiling the overc onsolidation ratio ...
  • Kurup, P.U. and N.K. Dudani, Neural Networks for Profiling Stress ...
  • Samui, P., T. Sitharam, and P.U. Kurup, OCR prediction using ...
  • Chen, B., Profiling stress history of clays using piezocones with ...
  • chmertmann, J., Guidelines for cone tes, performance, and design. Federal ...
  • Campanella, R. and P.K. Robertson. Applied cone research. 1981: ASCE. ...
  • Lunne, T., H. Christoffersen, and T. Tjelta. Engineering use of ...
  • Sully, J.P., R.G. Campanella, and P.K. Robertson, Overconsoli dation Ratio ...
  • Mayne, P. and R. Bachus. Profiling OCR in clays by ...
  • Konrad, J. and K. Law, Precon solidation pressure from piezocone ...
  • Mayne, P.W., Determination of OCR in clays by piezocone tets ...
  • Larsson, R. and M. Mulabdic, Piezocone tests in clay. Swedish ...
  • Kurup, P., Calibration chamber studies of miniature piezocone penetration tests ...
  • Baligh, M., Strain path method. Journal of Geotechnicl Engineering, 1985. ...
  • Tumay, M., et al., Flow Field Around Cones in Steady ...
  • Houlsby, G. and C. Teh. Analysis of the piezocone in ...
  • Whittle, A., Evaluation of a constitutive model for OVercon solidated ...
  • Rezania, M., A. Faramarzi, and A.A. Javadi, An evolutionary based ...
  • Giustolisi, O. and D.A. Savic, A symbolic data-driven technique based ...
  • Giustolisi, O. and L. Berard. Pipe level burst prediction using ...
  • Rezania, M., A. Javadi, and O. Giustolisi, Evaluation of liquefaction ...
  • Giustolisi, O., D. Savic, and A. Doglioni. Data Reconstruction and ...
  • Chen, B. and P. Mayne, Statistical relationships between piezocone measuremens ...
  • Hozouri, A., CPT Data Interpretation Using Artificial Intelligence Techniques, in ...
  • نمایش کامل مراجع