Study of Heat Transfer on Elliptic Parts in One and Two Row Arrays of Plate Fin and Tube Heat Exchangers, a CFD Approach

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,830

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCFDACCI03_103

تاریخ نمایه سازی: 17 دی 1389

چکیده مقاله:

The geometrical parameters have considerable effects on heat transfer and pressure drop on the performance of plate fin and tube heat exchangers. Previous investigators have only studied the effects of geometrical parameters on one row tube of these types of heat exchangers. Therefore, it is the aim of this study to develop the findings of the previous work and extend it to both one and two row tubes in cross flow direction using computational fluid dynamics (CFD). For one row tube heat exchangers, the effect of distance between the fins was investigated. The findings of this work revealed that this parameter has a considerable effect on pressure drop across the heat exchanger. It was also observed that increasing ellipticity of the fin tube would have a positive heat transfer effect. Furthermore, the effects of transverse and longitudinal pitch between the tubes on heat transfer and pressure drop characteristics in two rows have also been investigated. It was found that the transverse pitch has a remarkable effect on pressure drop. On the other hand, an increase in the logitudinal direction enhances the heat transfer characteristics. The finding of the present study also reveals that there is a good agreement with both experimental and numerical studies. It is also worth noting that although the present study has been carried out for one and two row tube heat exchangers, the results could be extended to heat exchangers with more rows tube. Finally, the results of this study could be utilized in designing plate fin and tube heat exchangers.

نویسندگان

Nasser Saghatoleslami

Department of Chemical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Morteza Khoshvaght Aliabadi

Department of Chemical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, IRAN

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • J. F. Richardson, J. H. Harker, J. R. Backhurst, Coulson ...
  • S. M. Walas, Chemical Process Equipment Selection and Design, Butterworth ...
  • R. Romero -Mendes, M. Sen, K. T. Yang, R. McClain, ...
  • F. Schulemberg, J. Eng. Ind., 88, (1966)178. ...
  • D. G. Shepherd, Heating, Piping Air Conditioning, (1956)28. ...
  • J. Y. Jang, M. C. Wu, International Journal ofHeat and ...
  • A. Erek, B. Ozerdem, L. Bilir, Z. Ilken, Applied Thermal ...
  • The 3" Nationl Conference on CFD Applications in Chemical Industries ...
  • نمایش کامل مراجع