Numerical Modeling to Optimize Construction Sequences of Karun 3 Powerhouse Cavern

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,271

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCHP03_587

تاریخ نمایه سازی: 3 فروردین 1391

چکیده مقاله:

Underground hydropower projects consist of complex underground spaces. Usually the powerhouse caverns are the largest and the most complex part of these spaces.The excavation and supporting sequences of these caverns are crucial from technical, construction and economical point of view. It is necessary to control the stability ofthese spaces and analyze displacements and stress distribution as the excavation proceeds. Large underground caverns of Karun 3 Dam and hydro project werestudied in this research. Karun 3 project is one of the major hydro projects in Iran.The geology of the dam site includes Asmari and Pabdeh formations, consisting of limestone and marly limestone. There are five instrumentation stations along thehydropower cavern. Instruments were multiple point borehole extensometers (MPBX) and load cells. A two dimensional distinct element modeling was used for theseanalyses. The powerhouse cavern, the transformer cavern and the inlet valve gallery were modeled along with the major discontinuities. Six patterns of excavationsequences were selected to be analyzed. These patterns consist of 6-, 14- and 18-partexcavation sequences with variable width of excavated spaces. The results of the stability analyses show that a pattern with 18-part excavation sequences has thelowest displacement values around the excavation, thus causing the most stable condition. Considering the ease of construction, the model with lower number ofexcavated parts is preferred. Therefore, the pattern with 14-part excavation sequences which also has low displacement values around the excavation was chosen as theoptimum pattern for construction.

نویسندگان

Reza Jamshidi Chenari

Dept of Civil Engineering, Guilan University, Rasht,Iran

Mohammad Hadi Sadaghiani

Deptof Civil Engineering, Sharif University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Barla G., M. Barla, L. Repetto 1999. Continuum and discontinuum ...
  • Broch, E., Myrvang, A.M., Stjern, G., 1996. Support of large ...
  • Hart, R.D. 1993. An introduction o distinct element modelling for ...
  • Huang, Z., Broch, E., Lu, M.2002, Cavern roof S tab ...
  • Huls, J., 1996. Karun 3 Hydro-electric Power Project, review of ...
  • ITASCA, 1996. UDEC (Universal Distinct Element Code), Volume I: User's ...
  • Jamshidi, C.R., 2001. Optimization of the construction sequences of large ...
  • Mahab Godds, 1994, Geological investigation and report, Mahab Godds Consulting ...
  • Mahab Godds, 1995, Geotechnical report - geomechnical parameters, Mahab Godds ...
  • نمایش کامل مراجع