AN INVESTIGATION ON BUTTED REGIONS IN AN ADHESIVELY-BONDED STEPPED-LAP JOINT WITH COMPOSITE AND METAL ADHERENDS
محل انتشار: کنفرانس ملی مهندسی مکانیک ایران
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 841
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCMII01_270
تاریخ نمایه سازی: 22 اردیبهشت 1393
چکیده مقاله:
Effects of butted regions presence on shear and tension stress in adhesive layer for a stepped-lap joint under tensile load are investigated. Both analytical and numerical solution are presented. In analytical solution, to obtain shear stress field in adhesive, the differential equation of longitudinal force for one of the adherends is solved by using boundary conditions. Analytical results are compared with resulted data by finite element method. A phenolic adhesive bonds a graphite-epoxy layer to a titanium adherend. The effects of adhesive thickness, material properties of adhesive, length of butted regions and presence of adhesive in just one region on shear stress and tension in adhesive in horizontal layer and vertical layer are studied. Results show that presence of adhesive in a butted region decreases shear stress in adhesive at that end. It is expressed that as length of a butted region increases, tension of its adhesive decreases.
کلیدواژه ها:
نویسندگان
Behnam Ghoddous
M.Sc. student, Department of Mechanical Engineering, Ahvaz Branch Islamic Azad University, Ahvaz
mohammad shishesaz
Professor, Department of Mechanical Engineering, Shahid Chamran University, Ahvaz
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :