PREPARATION OF COBALT NANOPARTICLES FOR SYNTHESIS OF MULTIWALLED CARBON NANOTUBES
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,125
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCNC01_115
تاریخ نمایه سازی: 14 شهریور 1392
چکیده مقاله:
Preparation of cobalt nanoparticles from bulk samples using scratch technique is introduced. The prepared cobalt nanoparticles used as metallic catalyst to grow multiwalled carbon nanotubes (MWCNTs). Cobalt nanoparticles were prepared by scratching of cobalt wire on sintered alumina plates. With scratching, cobalt nanoparticls and microparticls creates on the surface of alumina plates. The MWCNTs were synthesized using scratched sintered alumina at 950°C. The atmospheric pressure using methane as the precursor gas using thermal chemical vapor deposition (CVD) applied to grow MWCNTs. Characterization of cobalt nanoparticls and synthesized MWCNTs was carried out using scanning electron microscopy (SEM), transmission electron microscopy, X-ray diffraction (XRD) and simultaneous thermal analyser (STA). The results show that the mean diameter of cobalt nanoparticles is 40 nm and exhibit the same crystal structure as the bulk cobalt
کلیدواژه ها:
نویسندگان
Ali Nabipour Chakoli
Agricultural, Medical and Industrial research center, NSTRI, Karaj, Iran
Hossein Zamani Zeinali
Agricultural, Medical and Industrial research center, NSTRI, Karaj, Iran
Maryam Amirian
Teachers University, Moalem St., Shahrak Ghods, Niayesh, Tehran, Iran,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :