Investigation of organic additives on voltage rate in Aluminum hard-anodizing process

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 432

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCNNN01_144

تاریخ نمایه سازی: 4 مهر 1396

چکیده مقاله:

Hard anodizing is a term that relates to the anodic coatings with high hardness and abrasion resistance. As has been pointed out in an article by researchers, these coatings are usually more thicker than typical anodizing coating causes and in special circumstances to arise. The concentration of the oxide film layer in this process and therefore increases further. We also in the process electrolyte temperature is always kept low to reduce the rate of dissolution of the oxide film. In this project DC mode of Anodization used to study of voltage changes in different electrolyte consist of five types of organic additive.

نویسندگان

Seyed Aref Memerifard

Master student of Material science and engineering , Ceramic Department, Materials and Energy Research Center, Karaj, Iran

Mohammadreza Rahimipour

Department of Material science-Ceramic Engineering, Materials and Energy Research Center, Karaj, Iran

Iman Mobashrpour

Department of Material science-Ceramic Engineering, Materials and Energy Research Center, Karaj, Iran