Optimization of Process Parameters of Partial Oxidation of Methane
محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,054
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC14_382
تاریخ نمایه سازی: 3 آذر 1391
چکیده مقاله:
Partial oxidation is one of the technologies to produce synthesis gas from natural gas. The optimization of process parameters for partial oxidation of methane over Pt/Al2O3 catalyst washcoated on cordierite honeycomb monolith was developed using response surface methodology. The relationship between the response, i.e. CH4 conversion, with three independent variables, i.e. furnace temperature, methane composition of the feed, and methane flow rate, was presented as an empirical mathematical model. The maximum CH4 conversion of 58.94% was achieved by single-response optimization at the corresponding optimal process parameters
کلیدواژه ها:
Process parameters optimization ، Response surface methodology ، Centeral composite design ، Partial oxidation of methane ، Synthesis gas
نویسندگان
Faranak Akhlaghian
Department of Chemical Engineering, Faculty of Engineering, Kurdistan University, Sanndaj,
A Mohajeri
Gas Research Division, Research Institute of Petroleum Industry, Tehran, Iran
J Towfighi
Chemical Engineering Faculty, Tarbiat Modares University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :