Effect of Solvent on the Properties of TPU (PCL)/PCL Blends Prepared by Solution Method
محل انتشار: چهاردهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,639
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC14_686
تاریخ نمایه سازی: 3 آذر 1391
چکیده مقاله:
The blends of thermoplastic polyurethane based on polycaprolactone diol (TPU(PCL)) and Poly(e-caprolactone) (PCL) with 50% weight fraction are prepared by solution castmethod. Different solvents: tetrahydrofuran (THF), dimethylacetamide (DMAc) and dimethylformamide (DMF) were used. The blend prepared by THF solvent showed bettermiscibility and better phase dispersion. The morphology and mechanical properties of TPU(PCL)/PCL blends have been investigated by Scanning Electron Microscopy (SEM), Dynamic Mechanical Analysis (DMA) and tensile test. When a film cast from THF, Tg and Tm are slightly reduced to a lower temperature that also lowers the crystallization of PCL and inhance the blend miscibility and phase adhesion. The tensile test results and SEM micrographs confirmed better phase dispersion in THF system
کلیدواژه ها:
نویسندگان
Mahnaz Shahzamani
Polymer Engineering Department, Tarbiat Modares University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :