Engineering Critical Assessment of Offshore Pipelines under Operational Loading Phase According to BS 7910 Guideline
محل انتشار: هجدهمین همایش صنایع دریایی
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 616
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NSMI18_285
تاریخ نمایه سازی: 6 اسفند 1395
چکیده مقاله:
Offshore pipelines are an efficient long-distance transportation method for oil and gas. These are usually constructed by the use of girth welds, while welds may naturally contain flaws. Hence, it is essential to inspect the fracture response of girth welds in order to check the structural integrity of the pipeline. One of the guidelines that is using wide spread for investigating the fracture response of steel structures is BS 7910 which is based on Engineering Critical Assessment (ECA) method. In this paper Engineering Critical Assessment (ECA) of offshore pipeline girth welds is done according to BS 7910 through Crackwise software and the influence of several parameters on ECA is presented. It is concluded that Influence of misalignment on axial internal surface flaws is more significant than on axial external flaws. Furthermore it is observed that internal surface flaws have always larger values for tolerable defect heights than external surface cracks. In addition, circumferential surface flaws have evermore larger amount of acceptance level in defect heights than axial flaws.
کلیدواژه ها:
Engineering critical assessment (ECA) ، offshore pipeline ، surface cracks ، girth weld misalignment ، BS 7910
نویسندگان
Seyed Mohammad Hossein Sharifi
Assisstant Professor, Faculty of Marine Science, Petroleum University of Technology, Abadan, Iran;
Mehran Kaveh
M.Sc Student, Faculty of Marine Science, Petroleum University of Technology, Abadan, Iran
Hamed Saeidi Googarchin
Assistant Professor, School of Automotive Engineering, Iran University of Science and Technology, Tehran, Iran