Novel Fouling Release Coating Systems Based on Nano Technology for the Marine Industry
محل انتشار: هجدهمین همایش صنایع دریایی
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 338
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NSMI18_347
تاریخ نمایه سازی: 6 اسفند 1395
چکیده مقاله:
Non-toxic foul release based on silicone elastomers due to their low surface energy and low elastic modulus prevent fouling settlement on ship hulls. In this work, we designed fouling release coating based on nano technology systems. The influence parameters on the mechanical and surface properties of silicone elastomers investigated. SEM results reveal that the nano particles dispersed uniformly in silicone matrix. The result proved that incorporation of silica nano particles in the formulations increased the elastic modulus, tensile strength, elongation at break and abrasion resistance of coatings. Also, AFM results indicate that the average surface roughness for both coating system were lower than 100 nm. Moreover, the filed test proven the good fouling release performance in sea water. We managed to create a fouling release coating with better mechanical properties and almost the same fouling release behavior.
کلیدواژه ها:
نویسندگان
Ebrahim Raeissi
International Blue Ocean Co
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :