Structure-Property Relationships in Dicyandiamide-Cured Epoxy Resins

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,497

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PPSRC2011_013

تاریخ نمایه سازی: 30 بهمن 1390

چکیده مقاله:

Epoxy resins are widely used in different applications. Dicyandiamide (DDA) cured epoxy resin is a matrix system which is being used in manufacturing of structural composites. The structure property relationship in curing of epoxy resin by DDA is an important matter which it is not being extensively studied. In this paper, therefore, the curing and properties of three commercially available epoxy resins including LY564, LY5052 and LY 5210 were studied by using required molar ratio of DDA curing agent and 2phr monurone accelerator. The epoxy resins were characterized using FTIR, 1HNMR and 13CNMR spectroscopy. The curing beha-vior of epoxy-DDA systems was studied by differential scanning calorimetry. The mechanical properties of these systems where measured by lap shear tests. Characterization results showed that LY564, LY5052 and LY 5210 are based on diglycidyl ether of bisphenol A, 4,4' –tetraglycidyl diamine diphenol methane (TGDDM) and novolak epoxy resin structures, re-spectively. Thermal analysis revealed that the peak curing temperature of all systems were 156±1ºC and LY5210-DDA system has the highest Tg (140ºC) among the studied epoxy re-sins. The LY5052 had the highest (237J/g) and LY564 had the least (180J/g) heat of curing reactions. The lab shear strength of LY564, LY5052 and LY5210 DDA cured systems were 14.8, 12.6 and 10.8 MPa, respectively. Thermal properties and lap shear strength are attri-buted to the network epoxy structure of the cured structure of the epoxy matrix.

نویسندگان

Mahdieh Shervin

Iran Polymer and Petrochemical Institute, P. O. Box: ۱۴۹۷۵/۱۱۲, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Mcadams L. V., Gannon J. A., Epoxy resins in: Encyclopedia ...
  • Lee H., Neville K., Handbook of epoxy resins, McGraw Hill, ...
  • May C.A., Epoxy resins: chemistry _ technology, Marcel Dekker, New ...
  • Murphy J., Reinforced plastics handbook, Elsevier, UK, Chap. 1, 1998. ...
  • M Hayaty, MH Beheshty, M Esfandeh, A new Approach for ...
  • M Hayaty, MH Beheshty, M Esfandeh, Isothermal differential scanning calorimetry ...
  • Weatherhead R.G., FRP Technology, Applied Science, 1980, p286. ...
  • Guthner T., Hammer B., Curing of epoxy resins with dicyandiamide ...
  • Viscosity at 250C (cp) 1425 1350 ...
  • Proceedings of the Polym e r Proces s ing Society ...
  • نمایش کامل مراجع