Synthesis of rigid polyurethane foam from PET wastes

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,225

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PPSRC2011_154

تاریخ نمایه سازی: 30 بهمن 1390

چکیده مقاله:

Waste PET bottles were recycled by Diethylene glycol (DEG) at three weight ratios of DEG to PET, using zinc acetate as a catalyst for 4 hours. The glycolyzed product with the end of hydroxyl groups as a polyester polyols, and without purification, was reacted with polymeric diphenyl methane diisocyanate (PMDI) to obtain rigid polyurethane foams (RPUFs). Cyclopentane (CYP) and 1, 1-dichloro-1- fluoro ethane (HCFC-141b) was used as a blowing agent in the production of foams. The results were shown the density of foams decrease and foaming time of RPUFs increase when the ratio of DEG/PET decreased that its unexpected for us. And also, that compressive strength and modulus increased with increase density of foam. In Addison to, for reason immiscibility between glycolysis product and CYP, foam doesn’t form with CYP as blowing agent but HCFC-141b miscible with glycolysis product and foam form

نویسندگان

a.h Haghighi

Polymer Engineering Department, Shiraz Branch, Islamic Azad University, Shiraz, Iran

f Afshar Taromi

Polymer Engineering Department, AmirKabir University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • D. J. Suh, O. O. Park, H. K. Yoon, Polymer, ...
  • C. Lorenzetti, P. Manaresi, C. Berti, and G. Barbiroli, J. ...
  • S. Mishra and A S. Goje, Polym.-Plast. tech. and Eng., ...
  • Y. Yang, Y. Lu, H. Xiang, Y. Xu, and Y. ...
  • S. Takeshi, O. Idzumi, S. Tsutomu, O. Katsuto, Y. Satoshi, ...
  • C. Y. Kao, W. H. Cheng, B. Z. Wan, J. ...
  • G. Gamze, Y. Tuncer, O. Saadet, O. Murat, Thermochim Acta ...
  • V. A. Kosmidis, D. S. Achilias, G. P. Karayannidis, Macromol. ...
  • H. Glatzer, L. K. Doraiswamy, Chem. Eng. Sci. 2000, 55, ...
  • A. Oku, L. C. Hu, E. Yamada, J. Appl. Polym. ...
  • S. T. Lee, N. S. Ramesh, Po lymeric foams : ...
  • O. Saravari, K. P atho mwattanasak, and V. Pimpan, J. ...
  • F. Pardal and G. Tersac, Polym. Deg.and Stab. 2006, 91, ...
  • X. Guoxi, L. Maixi, and S. Chen, Polym. Deg. and ...
  • Proceedings of the Polymer Processing Society Asia/Australk Regional Meeting - ...
  • نمایش کامل مراجع