Poly (styrene-co-ethylhexylacrylate) latex with various functional groups: Mean-field model of melt intercalation for polymer/clay nanocomposites

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,294

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PPSRC2011_160

تاریخ نمایه سازی: 30 بهمن 1390

چکیده مقاله:

Poly (styrene-co-ethylhexylacrylate) latex particles containing various contents of carboxylic and hydroxyl functional groups were synthesized in the presence of anionic and nonionic surfactants, mainly sodium dodecyl sulfate (SDS) and Igepal, respectively. Surface properties of polymeric latexes were examined by contact angle measurements. The results showed that increasing the functional group content (1-6%) of polymeric latexes result in increasing the polar component of surface energy (γ p) and thereby total surface energy (γ total) increases. Meanwhile, the mean-field model of polymer melt intercalation in organically-modified layered silicates (OLS) originally developed by Vaia and Giannelis [1, 2] was applied for polymeric latexes synthesized in various conditions. In this model, the Helmholtz free energy change caused by the interaction of polymer, surfactant and clay is the strongest factor in determining the equilibrium structure of the nanocomposite system. Therefore, the Helmholtz free energy was calculated to study the possibility of melt intercalation of polymeric latexes in various nanoclays include as-received Cloisite®30B, Cloisite®15A and Na-MMT modified with aminoundecanoic acid (AUA) and Methacryloxyethyltrimethylammonium chloride (MAETAC). Helmholtz free energy below zero favors the polymer melt intercalation process, while free energies greater than zero indicates incompatibility of polymer matrix and organosilicate layers. The results revealed that increasing the percentage of both carboxylic and hydroxyl functional groups on co-monomer results in decreasing the Helmholtz free energy. Consequently, copolymer synthesized without any functional group in presence of anionic surfactant (SDS) had the lowest Helmholtz free energy. It seems that in-situ polymerization may be applied as an alternative method to obtain polymer/clay nanocomposites with presumably exfoliated structures

نویسندگان

m Mazidi

School of Chemical Engineering, Iran University of Science and Technology (IUST), P.O. Box ۱۶۸۴۴–۱۳۱۱۴, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • R.A. Vaia, E. P. Giannelis, Macromo lecules 30 (1997) 7990-7999. ...
  • R.A. Vaia, E. P. Giannelis, Macromo lecules 30 (1997) 8000-8009. ...
  • B. Bouali, F. Ganachaud, J.P Chapel, C. Pichot, and P. ...
  • November 15-17, 2011 Kish Island (Iran) م- Proceedings of the ...
  • نمایش کامل مراجع