Insitu polymerization of caprolactam in presence of NBR toward super tough PA6/NBR nano alloy
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,784
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_380
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
Anionic ring-opening polymerization of ε-caprolactam in presence of NBR leads to the formation of super tough polyamide 6 (PA6). The process of caprolactam polymerization was carried out in the presence of NBR during reactive melt mixing process and due to swelling of NBR in the molten caprolactam; separation and distribution of rubber particles to nano scale dissolution stage was provided. Experimental results showed that the composition which included 3% nitrile rubber gave better properties than the other formulations.These conditions led to the lowest residual monomer and better mechanical properties, as well. Other novelty of this investigation was nano spheres of NBR formation during melt polymerization of Polyamide 6 (PA6).
کلیدواژه ها:
نویسندگان
Amir Hossein Asadollahzadeh
Department of Polymer Processing, Iran Polymer and Petrochemical Institute, P.O.Box:۱۴۹۶۵-۱۱۵, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :