A HIGH TEMPERATURE LIFE PREDICTION CRACK GROWTH METHODOLOGY FOR THE POWER GENERATION INDUSTRY

سال انتشار: 1371
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,153

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

PSC07_016

تاریخ نمایه سازی: 14 شهریور 1386

چکیده مقاله:

In the power generation industry the possibility of catastrophic failure exists increasing age of the plant. During the components' service life failure problems at high temperatures under static and cyclic loading become a relevant safety and economic factor that must be considered. Several methods and international standards are available for estimating the creep/fatigue failure rates of these components. This paper considers the linear and non-linear fracture mechanics concepts applied to laboratory results to show the methodology available for life prediction at high temperatures. Creep/fatigue failures are determined in terms of stress intensity factor K and the creep parameter C*. Using experimental data, which makes use of limit analysis concepts and requires little knowledge of the creep strain behaviour of materials a relationship of cracking rate in terms of C* is shown. Method of estimating C* is presented and a model to predict failure is shown to satisfactorily predict high temperature cracking behaviour in engineering alloys.

نویسندگان

Djavanroodi

Tehran University IRAN

Etemad

Imperial College,London , SW۷ ۲BX U.K

Nikbin

Imperial College,London , SW۷ ۲BX U.K

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • SADANAN DA, K. and SHAHINIAN, P., 'Review of the fracture ...
  • ELLISON, E.G. and HARPER, M.P., 'Creep behaviour of components containing ...
  • NIKBIN, KM, NISHIDA, K., WEB STER, G.A., Creep/Fatigue crack growth ...
  • WINSTONE, M.R., NIKBIN, K.M. and WEBSTER, G.A., Models of failure ...
  • NIKBIN, K.M., SMITH, D.J., WEBSTER, G.A., An engineering approach to ...
  • Ainsworth, R.A., Goodall, LW, Defect assessment at elevated temperatures, J. ...
  • NIKBIN, K.M., SMITH, D.J., WEBSTER, G.A., Influence of creep ductility ...
  • D IMOPULOUS, V., NIKBIN, K. M., WEBSTER, G. A., Influence ...
  • DJAVAN ROODI F., WBSTER G. A., Comparison between numerical and ...
  • RICE, J.R.., 'Mathematical analysis in the mechanics of fracture', Treatise ...
  • ASTM E 813-87 Standard Test Method for J1c, a Measure ...
  • RIEDEL, H. and RICE, J.R., 'Fracture Mechanics', ASTM STP 700, ...
  • SAXENA, and LANDES, J.D., 'C haracte rization of creep crack ...
  • NIKBIN, K.M., SMITH, D.J. and WEBSTER, G.A., 'Prediction of creep ...
  • NIKBIN, K.M., WEBSTER, G.A. and TURNER, C.E., 'Relevance of non-linear ...
  • KUMAR, V., GERMAN, M.D. and SHIH, C.F., 'Estimation Technique for ...
  • WEBSTER, G.A., 'Crack growth at high temperature', Engineering approaches to ...
  • نمایش کامل مراجع