Behavior of Shear Friction Push-off Specimens Made Using Normal and Recycled Aggregates
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,758
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SASTECH06_024
تاریخ نمایه سازی: 28 مرداد 1391
چکیده مقاله:
This paper presents the experimental results of a study whose objective was to study the shear-friction behavior of normal-aggregate and recycled-aggregate reinforced concrete. Four specimens were cast and tested in a push-off set up. Two specimens were cast using natural coarse aggregate concrete (NAC) and two were made using recycled coarse aggregate concrete (RAC). The two NAC specimens were similar to the RAC specimens except for the type concrete. The specimens of the same concrete contained two different amounts of clamping reinforcement. The results showed that the general behavior of the RAC specimens was similar to that of the RAC specimens. It was also observed that the ultimate strength was reached soon after the yielding of the clamping reinforcement, and that the specimens resisted significant post-peak reserve strength. In all the cases, the ACI shear-friction model provided conservative estimates of the shear strength.
کلیدواژه ها:
نویسندگان
K.N Rahal
Civil Engineering Department, Kuwait University, Kuwait
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :