New Development of Semi-Active Control with Variable Stiffness by Orderly Iteration Method (OIM)

سال انتشار: 1382
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,308

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

SEE04_AP13

تاریخ نمایه سازی: 10 آبان 1384

چکیده مقاله:

In the last two decades active variable stiffness method has been successfully used to control the structures. In recent years semi-active control method has mostly been studied because of its low cost and reliability.The main objective of this study is to obtain required practical stiffness for any selected short period of time to control the behavior of structure so that displacements and accelerations do not exceed the allowable values. The semi-active system proposed herein is based on the orderly iteration of changing stiffness of structures. On the other hand it is assumed that the number of bracings which can be active automatically is limited. The feasibility of the method is shown by the eight and ten storey frame structures.

نویسندگان

F. Amini

Assoc. Profesor, Civil Eng. Dept., IUST, Tehran, Iran

F. Danesh

Ph.D. Student, Civil Eng. Dept., IUST, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • F. Amini (1996). *Response of Tall Structures Subjected to Earthquake ...
  • F. Amini (2002). *Optimal Active Control of Structures by Pole ...
  • -Active Control of Continuously Variable Stiffness Semi؛، .(1996) 3. S. ...
  • -Active Structural Control, System Identification Semi؛، .(1996) 4. B.F. Spencer, ...
  • نمایش کامل مراجع