Seismic Design Parameters Derivedfrom Typical Near-Fault Strong Motions

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 667

فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

UPUE03_263

تاریخ نمایه سازی: 25 آذر 1395

چکیده مقاله:

Based on typical near-fault ground motions, relations between motion pulse amplitudes and periods are utilized to scale the difference of near-fault motions between rock and soil sites. Features of ground motion pseudo-velocity response spectra (PVS), normalized pseudo-velocity spectra (NPVS) and bi-normalized pseudo-velocity spectra (BNPVS) are examined by considering the influence of site conditions. Observations show that, the use of parameters PGV and Tp for the normalization of PVS is applicable. They can effectively reduce the scatter in the response spectra of long period range; ground motion pulse waveforms are affected by local site conditions, BNPVS values of soil sites are larger than those of rock sites at normalized period T/Tv less than about 0.7, while at relative periods larger than 0.7 the reverse is true; spectral peak value of BNPVS at rock sites is significantly higher than that of soil sites. Then, using simple pulses and available predictive relationships for near-fault motions, acceleration response spectra of the near-fault region are developed. The BNPVS are finally used to test the applicability of the established design spectra.

نویسندگان

Milad Golbazi

M.Sc. Student Of Earthquake Engineering, Department Of Civil and Environmental Engineering, ShirazUniversity Of Technology, Shiraz, Iran,