Predictions of delamination of woven fabrication using a cohesive zone model

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 762

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH02_049

تاریخ نمایه سازی: 21 تیر 1393

چکیده مقاله:

In this paper Cohesive zone models are investigated in order to study delamination onset. The specimens were made of woven E-glass fiber and epoxy resin with fiber-volume fraction of Vf =53%. A simple structural test is proposed to validate the measured cohesive zone parameters. The values for Mode I and Mode II cohesive strengths (σIC and τIIC) were computed using the button peel stress (BPS) test and the single lap joint (SLJ) test respectively. The ability of a finite element cohesive zone model to predict delamination in a woven structural is investigated. Onset and growth of the delamination pre-existing crack in the fracture specimens are simulated by using modeling possibility within commercial finite element code ABAQUS. Comparisons between numerical predictions of finite element models with different mesh size and experimental load-displacement were performed. The predicted responses obtained with the Abaqus cohesive elements correlate well with the experimental solutions when the mesh refinement is modified.

نویسندگان

Mohsen Moslemi

PhD Student

M. R Khoshravan azar

Associate Professor, Faculty of Mechanical Engineering, University of Tabriz, ۵۱۶۶۶۱۴۷۶۶, Tabriz, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Brunner AJ, Blackman BRK, Davies P. Eng Fract Mech 2008 ...
  • Irwin GR. Journal of Applied Mechanics 1957; 24:361-366. ...
  • Rybicki EF, Kanninen MF Engineering Fracture Mechanics 1977; 9:931-938. ...
  • Hellen TK. International Journal forNumerica Methods in Engineering 1975; 9:187-207. ...
  • Parks DM. International Journal of Fracture 1974; 10(4):487-502. ...
  • Griffith AA. Philosophical Transactions of the Royal Society, London; Series ...
  • Dugdale, D.S. Yielding of steel sheets containing slits. J. Mech. ...
  • Barenblatt, G. Advanced Applied Mechanics. 1962; 7, 55-129. ...
  • Hillerborg, A, Mode er, M., Petersson, P.E.. Cement Conc. Res. ...
  • Xu XP, Needleman A. J Mech Phys Solids 1994:42: 1397-1434. ...
  • نمایش کامل مراجع