Prediction of uncut fiber factor in drilling composite with PVC core

سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 616

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH02_126

تاریخ نمایه سازی: 21 تیر 1393

چکیده مقاله:

Sandwich panels have some advantages such as ability to provide high bending stiffness, buckling and fatigue strength and light weight structure. For this advantage many researcher worked on this group of composites. In this work the influence of cutting speed, feed rate, and tool diameter on the uncut fiber has been investigated. A design of experiments (full factorial) was used to assess the importance of the drilling parameters, and digital photography technique was used to evaluate the damages from drilling. Uncut fiber factor (UCFF) in drilling is important factor. This paper is focused to develop a reliable method to predict cutting UCFF in drilling process with used artificial neural networks (ANNs) based on experimental data.

نویسندگان

P Ghabezi

PhD Student of Tehran University, Tehran, Iran

M Khoran

Lecturere of Esfarayen University, Esfarayen, Iran

I Khoran

Master of science Student, Shahid Bahonar University, Kerman, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Khashaba(2004) , Compos Struct 63(3-4), 313-327. ...
  • W.A. Haggerty, H. Ernst. (1958), ASTE Paper 101, 58. ...
  • S.M. Wu, J.M. Shen, L.H. Chen. (1982), Procedings of the ...
  • R. Doerr, E. Greene, B. Lyon, S. Taha.(1982), Technical Report, ...
  • J.H. Doran, C.R. Maikish. (1973), Composite Materials in Engineering Design, ...
  • A. Koplev, A. Lystrup, P. Vorm. (1983) Composites 14 (4), ...
  • K. Sakuma, Y. Yokoo, M. Seto.(1984), JSME 27, 1237-1244. ...
  • W. Koenig, P. Grass, A. Heintze, F. Okcu, C. Schmitz ...
  • R. Komanduri. (1993), ASME Mech. Eng.115 (4), 58-64. ...
  • M. K. A Mohd Ariffin, M. I. Mohd Ali, S. ...
  • Meulenkamp F, Alvarez Grima M (1999), Int J Rock Mech ...
  • Kulatilake PHSW, Qiong Wu, Hudaverdi T, Kuzu C (2010), Eng ...
  • نمایش کامل مراجع