Effect of shape memory alloy wires on energy absorption of laminatedcomposites in Tensile impact- Experimental study
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,222
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_161
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
In this paper, energy absorption of composite laminate reinforced by shape memory alloy (SMA) wires are investigated under tensile impact loading experimentally. This study is concerned with the characterization of laminated plates for energy absorption behavior under tensile impact loadings. A pendulum type impact test system using a fixture designed for Charpy impact machine is constructed for the experimental study according to standard EN ISO 3167. Composite laminates made by 4 layers of fiber glass/epoxy composites reinforced by nickel- itanium (NiTi) shape memory alloy (SMA) wires are prepared. Three types of composite laminates are made in this study, namely, the composite laminate without SMA wires, the laminate with one SMA wire with 2% pre-strain and the laminate with two SMA wires with 2% pre-strain with the same cross sections. Experimental investigations on impact tensile response of composite laminates revealed that the absorbed energy by specimens without SMA wires, specimens reinforced by one SMA wire and specimens reinforced by two SMA wires are 11.46 J, 13.41 J and 20.68 J. As could be observed, the results showed a significant effect of presence of embedding SMA wires into composite laminates on energy absorptions in impact tensile loading, by 17% and 80% for one and two embedded wires, respectively. The fracture surface of the tested specimens are also studied to see the effect of SMA wires on fracture behavior.
کلیدواژه ها:
نویسندگان
S. M. R Khalili
Professor
M Sharafi
Lab assistant, Center of Excellent for Research in Advanced Materials and Structures, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :