Numerical and experimental investigation on weld strength of a thermoplastic polymer using carbon fiber

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 409

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

WMECH03_139

تاریخ نمایه سازی: 26 شهریور 1395

چکیده مقاله:

Polymer welding can be successfully used in joining process of two or more parts made from plastics. This method can be used in several fields such as biomaterials and microelectronics. In this research, welding a thermoplastic polymer using carbon fiber has been investigated. Thermoplastic specimens are welded by a localized energy input with carbon fiber and without addition of any reinforcement. For this purpose, two approaches are followed to join parts of thermoplastic polymer. The first approach, the parts were welded without using any additive. In the second one, the Carbone fibers were placed between two parts and then the parts were welded. The result revel that using carbon fibers increases the tensile strength of the thermoplastic polymer. A finite element method was used for a lap-joint geometry and the unreinforced and reinforced specimens were modeled. Finite element method is a useful tool for evaluation of problems encounter in this area; we used Abaqus software and compared its result with experimental data for samples (with and without carbon fiber).

نویسندگان

M Abbasi Shirsavar

Master of Science, Composites and Smart Materials Research Laboratory, department of Mechanical Engineering, Tarbiat Modares University

D Akbari

Assistant Professor, Mechanical Engineering Faculty, Tarbiat Modares University, Tehran, Iran

M Golzar

Assistant Professor, Mechanical Engineering Faculty, Tarbiat Modares University, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • transmission welding of ABS: Effect of CN. concentration and process ...
  • polyethylene pipe materials, " Theor. Appl. Fract. Mech., vol. 74, ...
  • _ _ of plastics, " ASTM Int. Des. D, vol. ...
  • نمایش کامل مراجع