Assessment of Multiple Failure in CFRP Composite Laminates Using Damage-based Models
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 552
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH03_149
تاریخ نمایه سازی: 26 شهریور 1395
چکیده مقاله:
This study establishes a validated computational-experimental approach for quantitative assessment of the mechanics of deformation and mechanism of multiple failures in fiber-reinforced polymer (FRP) composite laminates. A continuum damage model for lamina and cohesive zone model for interface, are used to predict the multiple damage processes in the meso-scale of composite laminates. These constitutive and damage models are incorporated into the finite element (FE) simulation case of the structure. A carbon fiber-reinforced polymer (CFRP) composite beam specimen with anti-symmetric ply-sequence of [-45/45/-45/90/45/90/90/-45/90/45/-45/45] is tested under four-point bending loading condition. The comparable FE-predicted load-central deflection curve with measured data serves to validate the FE model with respect to the mechanics of the deformation. Results show that multiple damages of matrix cracking occur in the lamina No. 9, while the interfaces between laminas No. 8/9 and No. 9/10 experience edge delamination, as also observed experimentally. Such identical comparisons provide partial validation of the FE model with respect to the mechanisms of failure. It is noted that the fiber damage accumulation in the critical meso-scale laminas under tension (No. 10 to 12) significantly contributes to the observed stiffness degradation of the structure.
کلیدواژه ها:
نویسندگان
S.S.R. Koloor
Doctor Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM, Skudai, Johor, Malaysia.
M.R. Ayatollahi
Professor, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran
M.N Tamin
Professor, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM, Skudai, Johor, Malaysia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :