Removal of Mercaptans from Light Oil Cuts using Cu(II)-Y Type Zeolite
محل انتشار: همایش بین المللی ژئولیت ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,704
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ZEOLITE01_038
تاریخ نمایه سازی: 30 دی 1387
چکیده مقاله:
In this paper, the removal of mercaptans (also known as Thiols) from two types of oil cuts, L-SRG and Lnaphtha,
from Isfahan refinery was studied by using synthesized Cu(II)-Y type zeolite in a batch system. The
effect of three parameters, ion-exchange copper loading percentage, mass of absorbent per volume of oil cut
and time, on the removal of mercaptan (RSH) was investigated at ambient temperature. The numbers of
experiments were minimized by using Taguchi method. Four levels making orthogonal array L16, were
selected for each parameter. It was observed that the removal of sulfur was extremely influenced by selected
parameters.
کلیدواژه ها:
نویسندگان
amir hossein ghandi
Chemical Engineering Dept., University of Isfahan, Isfahan, Iran
fakher Seyedeyn-Azadb
Chemical Engineering Dept., University of Isfahan, Isfahan, Iran
Seyed Foad Aghamiri
Chemical Engineering Dept., University of Isfahan, Isfahan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :