CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

گواهی نمایه سازی مقاله BENDING AND SHEARING STRENGTH OF T-FORMED BEAM MADE OF STRUCTURAL LIGHT CONCRETE USING FRP SHEETS

عنوان مقاله: BENDING AND SHEARING STRENGTH OF T-FORMED BEAM MADE OF STRUCTURAL LIGHT CONCRETE USING FRP SHEETS
شناسه (COI) مقاله: ICCD03_086
منتشر شده در سومین کنفرانس بین المللی بتن و توسعه در سال ۱۳۸۸
مشخصات نویسندگان مقاله:

A Ghods - Department of Civil Engineering, University of Sistan and Baluchestan, Iran
M.H Beygi - Department of Civil Engineering, Babol University of Nushiravan
M Miri - Department of Civil Engineering, University of Sistan and Baluchestan, Iran
H Navaee - Department of Civil Engineering, Azad University of Tehran, South Branch

خلاصه مقاله:
To study enforcement effect of T-formed beams made of Structural lightweight concrete by binding CFRP with use of epoxy resin on the bending & shearing resistance, nine lab samples were designed, built and tested. These samples were divided into A, B & C groups, regarding their weakness. In all beams, two rods # 12 were used as compressive armature. In A, designing was such that beams have bending weakness. In these beams, two rods #12 were used as tensile armature and rod # 10 were used as shearing armature with a distance of 7.5 cm. In B, designing was such that beams have shearing weakness and 4 rods # 16 were used as tensile armature , the distance of stirrup was 30 cm. In c, designing was such that beams have shearing and also flexural weakness , In these beams , two rods # 12 were used as tensile armature and the distance of stirrups was 30 cm. According to observed studies, in flexural strengthening, beams have had a strength increase of 60%, although breaking was shearing and CFRP sheets didn’t reach the rupture stage. Studying beam’s shearing strengthening represents loading capacity increase of 20% and breaking was as stratified cutting of concrete with CFRP sheet. Also, we observed 45% increase of beam’s loading capacity from bending and also shearing strengthening together. In this case, failure mode was as stratified cutting of concrete with CFRP sheet from the beam’s side.

کلمات کلیدی:
strengthening, tensile armature, CFRP, flexural

صفحه اختصاصی مقاله و دریافت فایل کامل: https://www.civilica.com/Paper-ICCD03-ICCD03_086.html