CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

Using backwashed microfiltration as a pretreatment for ultrafiltration of oily wastewater

عنوان مقاله: Using backwashed microfiltration as a pretreatment for ultrafiltration of oily wastewater
شناسه ملی مقاله: ICHEC07_162
منتشر شده در هفتمین کنگره ملی مهندسی شیمی در سال 1390
مشخصات نویسندگان مقاله:

Sareh Rezaei Hosseinabadi - Research Centre for Membrane Separation processes, Faculty of Chemical Engineering,Iran University of Science and Technology, Narmak, Tehran, Iran
Mohammad Reza Sebzari - Research Centre for Membrane Separation processes, Faculty of Chemical Engineering,Iran University of Science and Technology, Narmak, Tehran, Iran
Mahmood Hemmati - Polymer Science and Technology Division, Research Institute of Petroleum Industry (RIPI),West Blvd., Near Azadi Sports Complex, Tehran, Iran
Toraj Mohammadi - Research Centre for Membrane Separation processes, Faculty of Chemical Engineering,Iran University of Science and Technology, Narmak, Tehran, Iran

خلاصه مقاله:
Application of cross-flow microfiltration (MF) process as a pre-treatment step and, partly in combination, with cross-flow ultrafiltration (UF) system as final-treatment techniques for efficient treatment of oilfield waste water is issued here. It is concluded that by pre-treating the oily wastewater with a large pore MF membrane operated with backwashing, the oils are partially coalesced in the pores of the membrane. This suggests that membrane flux decline isdue to the coalescing of oil particles in the membrane pores. In this research, investigations were carried out for treatment of oily wastewater by usinghybrid system of MF/UF. A ceramic (α-Al2O3) MF membrane with area of 0.24 m2 in microfiltration process and a hollow fiber Polyvinylchloride (PVC) UF membrane with area of 0.7 m2 in ultrafiltration process were employed for treatment of a typical oily wastewatercomes from API effluent of Tehran refinery. The oily wastewater effluent was entered to the MF module and a long term operation was carried out at the optimum condition. The MFoutput was collected to be used as the UF feed. TSS, Oil and grease, TOC, COD and BOD removal efficiencies are gained in sequence 100%, 98.21%, 86.6%, 85.02%, and 83.9%. This effluent meets the National Discharge Standards.Based on the results, MF-UF hybrid system as a new method proposed can be replaced with theconventional wastewater treatment method

کلمات کلیدی:
Oily wastewater; MF-UF hybrid system; Permeate flux

صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/340915/